HAKEL ISOLGUARD HIG-IFL1 insulating monitoring device with fault location is a system designed for comprehensive insulating status monitoring of single-phase insulated IT systems in the health sector.
Primary version of the HIG-IFL1 allows to monitor 8 power circuits. This number can be increased by 4 or 8 circuits using expansion module. Maximum number of monitored circuits is 32. The interconnection line between the individual devices must be conducted within a single switchboard.
Expansion module HIG-IFL/EXP4 allows to monitor another 4 circuits.
HIG-IFL1 together with expansion modules enables monitoring systems that are designed and operated in accordance with standards IEC 60364-7-710:2002 (electrical installations at healthcare facilities), IEC 61010-1:2010, IEC 61557-1:2007, IEC 61557-8:2007, IEC 61557-9:2009 up to 275 V AC maximum operating voltage to be monitored.
Expansion module for ISOLGUARD HIG-IFL1 produced by HAKEL
Insulation status fault location of AC systems with 0 to 275 V voltage
Expands number of fault location evaluation circuits by another four or eight individual circuits
Parameters measured by expander are displayed on the HIG-IFL
Separate supply voltage also allows to monitor IT power supply system, which is not under voltage
Optional connection of MDS-D and MDS-DELTA remote monitoring modules
MDS-D module displays number of IN input with insulation status fault
Module of the rack case 19″ standard 1U height
|Supply voltage range||Us||110 ÷ 240 V / 50 Hz|
|Possible type of the monitored IT power supply system||single-phase AC system|
230 V AC
according to ČSN
|Power consumption||P||maximum 6 VA|
|Degree of protection according to IEC 60529||IP20|
|Method of assembly||standard 19“rack rear panel of a distribution cabinet with a reduction system|
|Recommended section of the connected conductors||S||1 mm2|
|Operating temperature||ϑ||-10°C ÷ +60°C|
|Atmospheric pressure||86 ÷ 106 kPa|
|External magnetic and electric field||according to IEC 61326-2-4|
|Overvoltage category / testing voltage||according to ČSN EN 60664-1 ed.2|
|Pollution degree||2, according to ČSN EN 60664-1 ed.2|
|Article number||70 954|
|Installation instructions (410.74 KB)|
|2D model (768.97 KB)||for registered only|
|3D model (2.54 MB)||for registered only|