HT-NET 5Ecat/RJ Xseries

HT-NET 5Ecat/RJ Xseries: these surge protection devices intended for computer networks are specially designed for securing a faultless data transfer within computer networks category 5. They protect input electronic circuits of network cards against damage caused by surge effects in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 according to EN 62305. It is recommended to use these protection devices at the input of protected equipment.

Dimension drawing
Dimension drawing
PARAMETERS
Number of protected pairs 4
Connector type RJ45/RJ45
Nominal voltage UN 48 V
Maximum continuous operating voltage UC 57,6 V
Rated load current IL 300 mA
C2 Max. discharge current (8/20) Imax 2 kA
C2 Nominal discharge current ln (8/20) In 1 kA
C3 Voltage protection level at 1 kV/µS UP < 80 V
Data rate max. 250 Mbit/s
Series impedance per line R 2,2 Ω
Response time tA < 25 ns
Parasitic capacitance C < 42 pF
LPZ 1-2
Degree of protection of enclosure IP20
Operating temperature ϑ -40 °C ... +80 °C
Category tested acc. to IEC 61643:21-2000 C1, C2, C3, D1
Article number 57 017
CERTIFICATIONS
DOWNLOADS
Catalogue
EC declaration of conformity (82.4 KB) for registered only