HT-NET PoE+ 6cat 802.3at Xseries

HT-NET PoE+ 6cat 802.3at Xseries: these surge protection devices intended for computer networks are specially designed for securing a faultless data transfer within computer networks category 6. They protect input electronic circuits of network cards against damage caused by surge effects in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2-3 according to EN 62305. It is recommended to use these protection devices at the input of protected equipment.

Internal wiring diagram
Internal wiring diagram
Dimension drawing
Dimension drawing
PARAMETERS
Input/output RJ45/RJ45
Maximum continuous operating voltage (DC) UC 58 V
Maximum continuous operating voltage (AC) UC 41 V
Rated load current IL 1 A
C2 Max. výbojový proud (8/20 µs) line/PE Imax 2 kV/ 1 kA
C1 Nominal discharge current (8/20 µs) line-line In 300 V/ 150 A
C3 Voltage protection level at 1 kV/µS UP < 120 V
Voltage protection level line/line UP < 150 V
Voltage protection level line/PE UP < 700 V
Data rate max. 500 Mbit/s
Degree of protection of enclosure IP20
Operating temperature ϑ -40°C ... + 70°C
LPZ 1-2-3
Category tested acc. to IEC 61643:21-2000 C1, C2, C3
Approvals and certifications Cat. 6A/EA, ISO/IEC 11801
PoE IEEE 802.3at
Article number 57 102
CERTIFICATIONS
DOWNLOADS
Catalogue
2D model (661.01 KB) for registered only
3D model (395.98 KB) for registered only
EC declaration of conformity (82.4 KB) for registered only