Customer support

ZS-1P

ZS-1I, ZS-1P are the surge arresters type 3 according to EN 61643-11 and IEC 61643-11 and IEC 61643-11 designed for installation into electrical installation systems, e.g.: cable ducts and flush-mounted sockets as an additional protection. These devices are suitable supplements of socket distribution which are protected by PI-k protector. The right function of ZS-1I type is indicated by green LED diode. When the indicator is dark, the device must be replaced or technically checked. ZS-1P contains an acoustic fault indicator (buzzer).

Internal wiring diagram
Internal wiring diagram
Installation diagram
Installation diagram
Dimension drawing
Dimension drawing
PARAMETERS
Test class according to EN 61643-11 ed. 2 and IEC 61643-11 TYP3, CLASS III
Network type TN-S
Nominal voltage Un 230 V AC
Maximum continuous operating voltage UC 275 V AC
Nominal discharge current for class II test (8/20) In 3 kA (L/N), L(N)/PE)
Open circuit voltage Uoc 6 kV (L/N,L/PE)
Voltage protection level at UOC Up < 1,3 kV (L/N)
< 1 kV (L,(N)/PE)
Response time tA < 25 ns (L+/N)
< 100 ns (L/PE,N/PE)
Back-up fuse 16 A
Temporary overvoltage (TOV) L/N UT 335 V / 5 s (L/N)
Temporary overvoltage (TOV) N/PE UT 1200 V + U0 / 200 ms (L/PE)
LPZ 2-3
Housing material Polyamid PA6, UL94 V-0
Degree of protection of enclosure IP20
Operating temperature ϑ -40°C ... +70 °C
Failure signalisation (S) inbuilt piezosiren
Lifetime min. 100 000 h
Weight m 30 g
Article number 32 006
CERTIFICATIONS
DOWNLOADS
Catalogue
Installation instructions (2.53 MB)
2D model (387.94 KB) for registered only
3D model (59.68 KB) for registered only
Certificates (39.67 KB) for registered only